If you are looking to replace your present roof with metal roofs then this article is appropriate for you. Metal roofs are very durable and these roofs can easily survive wildfires, hail, and hurricanes.Metal roofings can be installed by an advanced DIY project or they can be installed easily by various roofing companies like Texas home improvements, Metal Roofs Austin. Installation of metal roofs can be very complicated and the process can vary based on the types of panels or shingles that you choose to use.
This guide regarding how to install your metal roofs will be provided with step-by-step instructions.
● Step 1: Safety Considerations:- While installing metal roofs keep in mind the safety aspects and prioritize it while working with them. Always make sure to use gloves, safety shoes, and safety goggles while you work. Make sure to use fall protection tools to prevent any accidents. Also, don’t forget to secure your ladders at the base.
● Step 2: Measre the roouf:- If you install a metal roof with corrugated panels or by placing a customized order, you should have the required materials and right length of materials and this idea of ordering the supplies in the correct amount can be gained if you know the square footage. You need to know the measurement of each section from the ridge to the outer edges.
● Step 3: Remove old roofs and repair any damage:- Even if it is possible to install your metal roofs over the existing old asphalt shingles, it is always recommended to remove the old roofs. Removing the old roofs will make it possible for you to look into the sheathing and flashing to fix any visible problems before moving forward.
● Step 4: Install drip edge and closure strips:- Always try to use 1 1\4 -inches galvanized roof nails for installation of the drip edges along with the eaves and the roof’s rake. Then it can be nailed into the sheathes about every 16 inches. Once the drip edge is properly placed add a sealant tape by the top of the drip edges and about 1.5 inches in from the edges of the flashing drip.
● Step 5: Installation of metal panels:- Make sure to align the metal roof panels so that they overlap the edges by 1\2 to 3\4 inches.
● Step 6: Install Ridge Cap:- When the panels are in place it is time to install the caps to the ridges. Follow relevant instructions to do this.
These steps can be followed while installing your metal roofs.
